Obtain the receiver serial number
Find the serial number on the rear of the receiver or, without removing an installed unit, open System → System Information. Record it accurately for the module configuration process.
Sources 1
Configure the module firmware
Visit the official iDataLink Maestro site linked in Sony’s instructions. Follow its configuration workflow for the actual vehicle and enter the receiver serial number. Install the resulting firmware on the module as directed by iDataLink. Firmware must be installed before Maestro features can be used.
Sources 1
Resolve a mismatch before installation
If the vehicle or receiver cannot be selected, stop and ask iDataLink support to resolve the configuration. Keep the selected vehicle, module identity and receiver serial with the installation records. Do not use another car’s profile simply to finish the wizard.
Sources 1
Sources / references 1
- Sony — Getting iDataLink Maestro ready ↗Reviewed Oct 8, 2026
Questions about this guide?
Share your vehicle details and what you have tried. Community posts are moderated; technical answers require verification.
Related discussions → · Ask a question →