Install the support
Release the plastic fuel-line holder and remove its metal bracket. Uncover the M6 mounting hole. Fit the brace with one supplied M6 bolt; the other bolt and washer also retain the fuel-line bracket. Align the bracket’s locating tab with its corresponding hole.
Sources 1
Apply the specified preload
Torque both M6 mounting bolts to 12–14 ft-lb and snap the fuel-line holder back in. Advance the set screw until it contacts the master cylinder, then another half to one turn. Secure the jam nut with the 19mm wrench.
Sources 1
Products in this guide
Sources / references 2
- PERRIN official installation instructions ↗Reviewed Oct 8, 2026
- PERRIN official instructions database ↗Reviewed Oct 8, 2026
Questions about this guide?
Share your vehicle details and what you have tried. Community posts are moderated; technical answers require verification.
Related discussions → · Ask a question →