Remove and transfer
Remove the intake scoop, disconnect the right fan’s three connectors and remove its two bolts and fan. Release the charge-pipe mounting bolt and both quick-release connections. Remove the intercooler coupler. Transfer the original O-ring and lower clip to the turbo adapter; lightly lubricate the O-ring.
Sources 1
Seat and align
Fit the lower coupler and adapter, confirming the clip locks by pulling and twisting. Install the upper coupler and pipe. Maintain at least 1/2 inch to sensors and engine components, plus fan clearance. Secure clamps behind tube beads. Refit and reconnect the fan; check idle and leaks.
Sources 1
Add the support
Fit the bracket only after normal operation is confirmed. Align without forcing hardware; tighten its M6 bolt to 10 ft-lb and the 8-32 screws by hand. Check for metal contact, reinstall the scoop and test gently.
Sources 1
Products in this guide
Sources / references 2
- PERRIN official installation instructions ↗Reviewed Oct 8, 2026
- PERRIN official instructions database ↗Reviewed Oct 8, 2026
Questions about this guide?
Share your vehicle details and what you have tried. Community posts are moderated; technical answers require verification.
Related discussions → · Ask a question →