Free the cable
Select neutral and safely support the raised vehicle. Remove the right-side linkage cover. Remove the pivot retaining pin and large washer, then the clip retaining the cable to its bracket. Slide the cable from the pivot and bracket.
Sources 1
Replace the insert
Twist the original bushing out with a screwdriver. Grease the replacement on all sides and grease the pivot. Press the bushing fully into the eyelet with its flange toward the transmission. Feed the cable through its bracket and onto the pivot; restore neutral if the linkage moved.
Sources 1
Restore retention
Reinstall the large washer, pin and cable clip completely. Check shifting from inside for binding or clunks. Refit the lower linkage cover and torque its bolts to 15 ft-lb.
Sources 1
Products in this guide
Sources / references 1
- PERRIN official installation instructions ↗Reviewed Oct 8, 2026
Questions about this guide?
Share your vehicle details and what you have tried. Community posts are moderated; technical answers require verification.
Related discussions → · Ask a question →