Remove the airbox
Release the radiator-cover pins and cover. Remove the scoop’s two T25 screws. Loosen the airbox accordion-tube clamp and unclip its side hose. Lift the airbox enough to release its lower secondary-air hose, then remove the assembly.
Sources 1
Transfer mounts and fit
Attach the supplied small filter to the secondary-air hose. Transfer both rubber mounting posts to the APR intake. Loosen the throttle-body clamp and rotate the accordion tube clear. Lubricate the frame mounting holes, seat the APR intake, reconnect the accordion tube, and tighten both clamps. Reclip the side hose.
Sources 1
Finish the air path
Clamp the main filter to the APR intake. Cable-tie the secondary-air filter to the original bracket. Separate the original rubber duct from airbox and scoop; attach the scoop directly to the APR intake, with the intake lip beneath its tabs. Refit its two screws.
Sources 1
Restore the cover
Reset each radiator-cover pin so its center protrudes. Engage the cover with the bumper, insert the pins, and press their centers flush. Affix the supplied inspection label visibly under the hood.
Sources 1
Products in this guide
Sources / references 1
- APR installation instructions ↗Reviewed Oct 8, 2026
Questions about this guide?
Share your vehicle details and what you have tried. Community posts are moderated; technical answers require verification.
Related discussions → · Ask a question →