Remove the original pipe
Lift the engine cover at its corners. Release the MAF-end spring clamp, remove the pipe support T30 screw, and release the upper turbo-coupler clamp. Lift the pipe for access. Release all four PCV connector catches together using four small screwdrivers. Remove the pipe, then the lower clamp and original turbo coupler.
Sources 1
Fit the new coupler
Transfer the lower spring clamp to the APR coupler. Fully seat it on the turbo, orient its PCV connection without straining the hose, and secure the clamp. Reconnect the PCV fitting until all four catches engage.
Sources 1
Assemble and secure
Loosely refit the T30 support screw. Attach the accordion coupler to the APR pipe. Install the pipe between turbo coupler and MAF, with its support bracket under the T30 washer. Secure all hose clamps. Tighten the support screw to 10 Nm and reseat the engine cover.
Sources 1
Products in this guide
Sources / references 1
- APR installation instructions ↗Reviewed Oct 8, 2026
Questions about this guide?
Share your vehicle details and what you have tried. Community posts are moderated; technical answers require verification.
Related discussions → · Ask a question →