Remove the original tube
Lift off the engine cover. Slide the spring clamp away from the back of the APR airbox. Loosen the 7 mm clamp at the factory turbo inlet and remove the original accordion tube and clamps.
Sources 1
Fit both couplers
Secure the straight silicone coupler to the factory turbo inlet using a supplied 8 mm clamp. Secure the accordion coupler to the APR airbox with another supplied clamp.
Sources 1
Connect the carbon pipe
Fit the pipe between the two couplers, then secure its front and rear joints with the remaining supplied clamps. Reinstall the engine cover by pressing it into its original mountings.
Sources 1
Products in this guide
Sources / references 2
- APR installation instructions ↗Reviewed Oct 8, 2026
- APR product application ↗Reviewed Oct 8, 2026
Questions about this guide?
Share your vehicle details and what you have tried. Community posts are moderated; technical answers require verification.
Related discussions → · Ask a question →