Remove and retain the right pieces
With the vehicle off and cool, follow the brace/access instructions, unplug the sensor and release the intake. Retain the lower box, its fasteners and the rubber chassis mounts as directed.
Sources 1
Fit the hose and sensor
Use the documented hose orientation and transfer the sensor with the supplied hardware. Protect any open intake path from debris during the work, then remove that protection before completing connections.
Sources 1
Check the airbox fit
Orient the filter correctly, join the new lid to the retained base and fit the specified rubber washers. Do not crush the washers by overtightening.
Sources 1
Finish and inspect
Seat the assembly in all mounts, secure the hose connections and reconnect the sensor latch. Refit the brace with the verified fastening procedure. Check for interference and remove tools before closing the hood.
Sources 1
Sources / references 1
- Dinan INS760-0068 — B58 G-series intake, revision C ↗Reviewed Sep 27, 2026
Questions about this guide?
Share your vehicle details and what you have tried. Community posts are moderated; technical answers require verification.
Related discussions → · Ask a question →