Conventional controller
Select 01-Engine, Basic Settings, and group 035 if supported. Choose Go, then ON/OFF/Next. The pump should run for 30 seconds; this is normally enough after a filter change. Extensive injector or fuel-system work needs at least three cycles. Finish with Done, Go Back.
Sources 1
UDS controller
Do not enter conventional group numbers. Select the Transfer Fuel Pump test or documented equivalent and choose Go. Confirm Running, wait for Finished Correctly, then Stop.
Sources 1
Sources / references 1
- Ross-Tech VCDS manual ↗Reviewed Oct 8, 2026
Questions about this guide?
Share your vehicle details and what you have tried. Community posts are moderated; technical answers require verification.
Related discussions → · Ask a question →